|
Product Details:
Payment & Shipping Terms:
|
| Other Name: | Telephone Handset Speaker | Sound Pressure Level: | 93±3dB |
|---|---|---|---|
| Response Frequency: | F0: 550 ±20%Hz | Input Power(nom./max.): | 1.0W /1.5W |
| Audible Noise: | Must Be Free Audible Noise | Distortion: | Less Than 10% At 1KHz 0.1W/10cm |
| Operating Temperature: | -20℃ To +60℃ | DC Resistance: | 8±15%Ω |
| High Light: | raw speaker drivers,mylar cone speaker |
||
36mm ultra thin mylar raw speaker 8Ω 1W for telephone handset
A speaker is an electroacoustic transducer which converts an electrical audio signal into a corresponding sound. It produces sound by using an electromagnet to move a flexible cone back and forth. They use drivers to help translate electrical signals into physical vibrations so that you can hear recorded sounds. A tweeter is the type of speaker driver that produces the highest range frequency. The other two main drivers are woofers and midrange.
This speaker has a low profile design and come with mylar cones for increased durability, making them ideally suited for use in headset and handheld applications.
Miniature speakers are ideal for use at cold temperatures particularly outdoor applications with high humidity and unfavourable conditions.
Small & thin design micro speakers with loudness, intelligibly voice specifically for products with small diameter requirements. ANYO provides the products that are suitable for multifarious applications such as headphones or earphones.
Features and benefits
• Plastic basket
• Plastic mylar diaphragm
• Balanced frequency response
• Good voice reproduction
• IP65
Applications:
• Nurse Call Systems
• Medical products
• Test equipment
• Emergency locators
• Telephone security products
• Monitoring equipment
Reliability test:
| General | After any following tests the response at 1KHz shall not deviate more than ±3 dB from the initial value. |
| Load test | Input power: 1W, PINK noise 72 hours |
| Humidity test | Temperature: +40℃±3℃ Relative Humidity: 90%~95% Duration: 48 hours(recovery 6 hours) |
| Drop test | Height: 1M Cycle: 10cycles |
| Vibration test | Frequency: 1800cycles/min. Amplitude: 1.5mm Duration: 1 hour in each of 3axes |
| Temperature shock test | Temperature: -20°±3℃ 65℃±3℃ Total:32 cycles Duration: 30minutes Transition time: less than 5minutes |
| High temperature test | Temperature: +65℃±3℃ Duration: 96 hours |
| Low temperature test | Temperature: -20℃±3℃ Duration: 96 hours |
| Terminal strength test | Load: 1.5 Kg Duration: 15sec (Shall be normal) |
Contact Person: Mr. Roy Zhang
Tel: 86 574 56807757
Fax: 86-574-55844980
